DC100计时器 定时器 薄型大屏幕电子计时器 提醒器

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

2. Opeation:

1. Take away the battey compatment cove accoding to the indication on the back case, install 1 piece 1.5V (AAA) battey with coect polaity, put back the battey compatment cove, the device entes CLOCK mode fist.
2. Unde CLOCK mode, pess START/STOP button one time to change to COUNT-DOWN time mode, pess ‘M’, ‘S’ and ‘START/STOP’ buttons simultaneously, the device etuns to CLOCK mode.
3. CLOCK setting:

Pess ‘S’ button to change between 12h and 24h style.

Pess ’M’ button fo 2 seconds to ente hou setting, pess ‘S’ button to change hou value.

Pess ‘M’ button one time again to ente minute setting, pess ‘S’ button to change minute value.

Pess ‘M’ button one time again to close CLOCK setting, the device etuns to nomal CLOCK mode.

1. COUNT-DOWN time setting:

Unde count-down mode, pess ‘M’ button to set minute value, pess ‘S’ button to set second value, Pess ‘M’ button & ‘S’ button simultaneously to ZERO the minute and second value.

Afte minute value and second value is set, pess ‘START/STOP’ button one time to stat time counting-down, duing counting-down, pess ‘START/STOP’ button one time to pause, pess ‘START/STOP’ button one time again to estat counting-down fom the pause point. Afte the device counts down to the zeo, it gives off ‘di-di’ sound fo about 60 seconds. To stop ‘di-di’ sound befoe 60 seconds, pess ‘START/STOP’ button one time to ealize.

Note:No action fo 5 minutes unde ‘COUNT-DOWN TIMER’ mode, the device etuns to CLOCK mode.

3. NOTICE:

1. In case of any abnomal display o action, please take out the 1.5V battey and install it back afte 2 seconds, then the device stats nomal woking.
2. Please put the eplaced battey at the places appointed by the Govenment
3. We will not infom sepaately in case of any changes made to this mete.

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

2. Opeation:

1. Take away the battey compatment cove accoding to the indication on the back case, install 1 piece 1.5V (AAA) battey with coect polaity, put back the battey compatment cove, the device entes CLOCK mode fist.
2. Unde CLOCK mode, pess START/STOP button one time to change to COUNT-DOWN time mode, pess ‘M’, ‘S’ and ‘START/STOP’ buttons simultaneously, the device etuns to CLOCK mode.
3. CLOCK setting:

Pess ‘S’ button to change between 12h and 24h style.

Pess ’M’ button fo 2 seconds to ente hou setting, pess ‘S’ button to change hou value.

Pess ‘M’ button one time again to ente minute setting, pess ‘S’ button to change minute value.

Pess ‘M’ button one time again to close CLOCK setting, the device etuns to nomal CLOCK mode.

1. COUNT-DOWN time setting:

Unde count-down mode, pess ‘M’ button to set minute value, pess ‘S’ button to set second value, Pess ‘M’ button & ‘S’ button simultaneously to ZERO the minute and second value.

Afte minute value and second value is set, pess ‘START/STOP’ button one time to stat time counting-down, duing counting-down, pess ‘START/STOP’ button one time to pause, pess ‘START/STOP’ button one time again to estat counting-down fom the pause point. Afte the device counts down to the zeo, it gives off ‘di-di’ sound fo about 60 seconds. To stop ‘di-di’ sound befoe 60 seconds, pess ‘START/STOP’ button one time to ealize.

Note:No action fo 5 minutes unde ‘COUNT-DOWN TIMER’ mode, the device etuns to CLOCK mode.

3. NOTICE:

1. In case of any abnomal display o action, please take out the 1.5V battey and install it back afte 2 seconds, then the device stats nomal woking.
2. Please put the eplaced battey at the places appointed by the Govenment
3. We will not infom sepaately in case of any changes made to this mete.

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

2. Opeation:

1. Take away the battey compatment cove accoding to the indication on the back case, install 1 piece 1.5V (AAA) battey with coect polaity, put back the battey compatment cove, the device entes CLOCK mode fist.
2. Unde CLOCK mode, pess START/STOP button one time to change to COUNT-DOWN time mode, pess ‘M’, ‘S’ and ‘START/STOP’ buttons simultaneously, the device etuns to CLOCK mode.
3. CLOCK setting:

Pess ‘S’ button to change between 12h and 24h style.

Pess ’M’ button fo 2 seconds to ente hou setting, pess ‘S’ button to change hou value.

Pess ‘M’ button one time again to ente minute setting, pess ‘S’ button to change minute value.

Pess ‘M’ button one time again to close CLOCK setting, the device etuns to nomal CLOCK mode.

1. COUNT-DOWN time setting:

Unde count-down mode, pess ‘M’ button to set minute value, pess ‘S’ button to set second value, Pess ‘M’ button & ‘S’ button simultaneously to ZERO the minute and second value.

Afte minute value and second value is set, pess ‘START/STOP’ button one time to stat time counting-down, duing counting-down, pess ‘START/STOP’ button one time to pause, pess ‘START/STOP’ button one time again to estat counting-down fom the pause point. Afte the device counts down to the zeo, it gives off ‘di-di’ sound fo about 60 seconds. To stop ‘di-di’ sound befoe 60 seconds, pess ‘START/STOP’ button one time to ealize.

Note:No action fo 5 minutes unde ‘COUNT-DOWN TIMER’ mode, the device etuns to CLOCK mode.

3. NOTICE:

1. In case of any abnomal display o action, please take out the 1.5V battey and install it back afte 2 seconds, then the device stats nomal woking.
2. Please put the eplaced battey at the places appointed by the Govenment
3. We will not infom sepaately in case of any changes made to this mete.

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

2. Opeation:

1. Take away the battey compatment cove accoding to the indication on the back case, install 1 piece 1.5V (AAA) battey with coect polaity, put back the battey compatment cove, the device entes CLOCK mode fist.
2. Unde CLOCK mode, pess START/STOP button one time to change to COUNT-DOWN time mode, pess ‘M’, ‘S’ and ‘START/STOP’ buttons simultaneously, the device etuns to CLOCK mode.
3. CLOCK setting:

Pess ‘S’ button to change between 12h and 24h style.

Pess ’M’ button fo 2 seconds to ente hou setting, pess ‘S’ button to change hou value.

Pess ‘M’ button one time again to ente minute setting, pess ‘S’ button to change minute value.

Pess ‘M’ button one time again to close CLOCK setting, the device etuns to nomal CLOCK mode.

1. COUNT-DOWN time setting:

Unde count-down mode, pess ‘M’ button to set minute value, pess ‘S’ button to set second value, Pess ‘M’ button & ‘S’ button simultaneously to ZERO the minute and second value.

Afte minute value and second value is set, pess ‘START/STOP’ button one time to stat time counting-down, duing counting-down, pess ‘START/STOP’ button one time to pause, pess ‘START/STOP’ button one time again to estat counting-down fom the pause point. Afte the device counts down to the zeo, it gives off ‘di-di’ sound fo about 60 seconds. To stop ‘di-di’ sound befoe 60 seconds, pess ‘START/STOP’ button one time to ealize.

Note:No action fo 5 minutes unde ‘COUNT-DOWN TIMER’ mode, the device etuns to CLOCK mode.

3. NOTICE:

1. In case of any abnomal display o action, please take out the 1.5V battey and install it back afte 2 seconds, then the device stats nomal woking.
2. Please put the eplaced battey at the places appointed by the Govenment
3. We will not infom sepaately in case of any changes made to this mete.

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

2. Opeation:

1. Take away the battey compatment cove accoding to the indication on the back case, install 1 piece 1.5V (AAA) battey with coect polaity, put back the battey compatment cove, the device entes CLOCK mode fist.
2. Unde CLOCK mode, pess START/STOP button one time to change to COUNT-DOWN time mode, pess ‘M’, ‘S’ and ‘START/STOP’ buttons simultaneously, the device etuns to CLOCK mode.
3. CLOCK setting:

Pess ‘S’ button to change between 12h and 24h style.

Pess ’M’ button fo 2 seconds to ente hou setting, pess ‘S’ button to change hou value.

Pess ‘M’ button one time again to ente minute setting, pess ‘S’ button to change minute value.

Pess ‘M’ button one time again to close CLOCK setting, the device etuns to nomal CLOCK mode.

1. COUNT-DOWN time setting:

Unde count-down mode, pess ‘M’ button to set minute value, pess ‘S’ button to set second value, Pess ‘M’ button & ‘S’ button simultaneously to ZERO the minute and second value.

Afte minute value and second value is set, pess ‘START/STOP’ button one time to stat time counting-down, duing counting-down, pess ‘START/STOP’ button one time to pause, pess ‘START/STOP’ button one time again to estat counting-down fom the pause point. Afte the device counts down to the zeo, it gives off ‘di-di’ sound fo about 60 seconds. To stop ‘di-di’ sound befoe 60 seconds, pess ‘START/STOP’ button one time to ealize.

Note:No action fo 5 minutes unde ‘COUNT-DOWN TIMER’ mode, the device etuns to CLOCK mode.

3. NOTICE:

1. In case of any abnomal display o action, please take out the 1.5V battey and install it back afte 2 seconds, then the device stats nomal woking.
2. Please put the eplaced battey at the places appointed by the Govenment
3. We will not infom sepaately in case of any changes made to this mete.

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

2. Opeation:

1. Take away the battey compatment cove accoding to the indication on the back case, install 1 piece 1.5V (AAA) battey with coect polaity, put back the battey compatment cove, the device entes CLOCK mode fist.
2. Unde CLOCK mode, pess START/STOP button one time to change to COUNT-DOWN time mode, pess ‘M’, ‘S’ and ‘START/STOP’ buttons simultaneously, the device etuns to CLOCK mode.
3. CLOCK setting:

Pess ‘S’ button to change between 12h and 24h style.

Pess ’M’ button fo 2 seconds to ente hou setting, pess ‘S’ button to change hou value.

Pess ‘M’ button one time again to ente minute setting, pess ‘S’ button to change minute value.

Pess ‘M’ button one time again to close CLOCK setting, the device etuns to nomal CLOCK mode.

1. COUNT-DOWN time setting:

Unde count-down mode, pess ‘M’ button to set minute value, pess ‘S’ button to set second value, Pess ‘M’ button & ‘S’ button simultaneously to ZERO the minute and second value.

Afte minute value and second value is set, pess ‘START/STOP’ button one time to stat time counting-down, duing counting-down, pess ‘START/STOP’ button one time to pause, pess ‘START/STOP’ button one time again to estat counting-down fom the pause point. Afte the device counts down to the zeo, it gives off ‘di-di’ sound fo about 60 seconds. To stop ‘di-di’ sound befoe 60 seconds, pess ‘START/STOP’ button one time to ealize.

Note:No action fo 5 minutes unde ‘COUNT-DOWN TIMER’ mode, the device etuns to CLOCK mode.

3. NOTICE:

1. In case of any abnomal display o action, please take out the 1.5V battey and install it back afte 2 seconds, then the device stats nomal woking.
2. Please put the eplaced battey at the places appointed by the Govenment
3. We will not infom sepaately in case of any changes made to this mete.

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1

2. Opeation:

1. Take away the battey compatment cove accoding to the indication on the back case, install 1 piece 1.5V (AAA) battey with coect polaity, put back the battey compatment cove, the device entes CLOCK mode fist.
2. Unde CLOCK mode, pess START/STOP button one time to change to COUNT-DOWN time mode, pess ‘M’, ‘S’ and ‘START/STOP’ buttons simultaneously, the device etuns to CLOCK mode.
3. CLOCK setting:

Pess ‘S’ button to change between 12h and 24h style.

Pess ’M’ button fo 2 seconds to ente hou setting, pess ‘S’ button to change hou value.

Pess ‘M’ button one time again to ente minute setting, pess ‘S’ button to change minute value.

Pess ‘M’ button one time again to close CLOCK setting, the device etuns to nomal CLOCK mode.

1. COUNT-DOWN time setting:

Unde count-down mode, pess ‘M’ button to set minute value, pess ‘S’ button to set second value, Pess ‘M’ button & ‘S’ button simultaneously to ZERO the minute and second value.

Afte minute value and second value is set, pess ‘START/STOP’ button one time to stat time counting-down, duing counting-down, pess ‘START/STOP’ button one time to pause, pess ‘START/STOP’ button one time again to estat counting-down fom the pause point. Afte the device counts down to the zeo, it gives off ‘di-di’ sound fo about 60 seconds. To stop ‘di-di’ sound befoe 60 seconds, pess ‘START/STOP’ button one time to ealize.

Note:No action fo 5 minutes unde ‘COUNT-DOWN TIMER’ mode, the device etuns to CLOCK mode.

3. NOTICE:

1. In case of any abnomal display o action, please take out the 1.5V battey and install it back afte 2 seconds, then the device stats nomal woking.
2. Please put the eplaced battey at the places appointed by the Govenment
3. We will not infom sepaately in case of any changes made to this mete.

1. Function & Chaacteistics:

lClock & count-down time

lMax count-down: 99 minutes 59 seconds

lClock style: 12h/24h changeable

l2 putting modes: [1] magnetic stick [2] table stand

lsupe low powe-consumption

lpowe supply: 1.5V (AAA) x 1